{"product_id":"isr-performance-inner-tie-rods-nissan-240sx","title":"ISR Performance Inner Tie Rods - Nissan 240sx","description":"\u003cp\u003eThe ISR Performance Inner Tie Rods are strengthened replacement inner tie rods for the Nissan 240SX, designed to add steering angle at full lock and improve durability over the factory units. Longer and thicker than the OEM tie rods, with an included rack spacer to extend the steering range.\u003c\/p\u003e\n\n\u003ch3\u003eWhat It Does\u003c\/h3\u003e\n\u003cp\u003eThe factory 240SX inner tie rods limit steering wheel rotation, which caps the lock angle you can dial in even with an angle knuckle setup. The ISR inner tie rods are longer (10 9\/16 inches vs OEM 10 1\/4 inches) and thicker (0.550 inch vs OEM 0.475 inch), with an additional 1\/4 inch slip-on rack spacer. The combined extra length plus spacer increases the steering rotation range, which translates to more usable lock for drift builds. The thicker cross section also handles the extra side loads from aggressive driving better than OEM.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM tie rod:\u003c\/strong\u003e 10 1\/4 inches long, 0.475 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISR tie rod:\u003c\/strong\u003e 10 9\/16 inches long, 0.550 inch thick\u003c\/li\u003e\n\u003cli\u003eIncludes additional 1\/4 inch slip-on rack spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eS13 Owners: Outer Tie Rod Note\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have an S13, you must pair these inner tie rods with S14 OEM or aftermarket outer tie rod ends.\u003c\/strong\u003e The ISR inner tie rods use the S14 thread spec on the outer end, so factory S13 outer ends will not thread on. S14 outer tie rod ends are inexpensive and widely available - plan to order them alongside this part if you're running an S13. S14 owners can use their factory outer tie rod ends directly.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1989-1994 Nissan 240SX (S13) - requires S14 outer tie rod ends\u003c\/li\u003e\n\u003cli\u003e1995-1998 Nissan 240SX (S14) - works with factory outer tie rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x ISR Performance inner tie rods (driver and passenger)\u003c\/li\u003e\n\u003cli\u003eIncluded hardware (slip-on rack spacers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ISR Performance\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e IS-ITR-240\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Strengthened Inner Tie Rods (Pair)\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e 1989-1998 Nissan 240SX (S13 and S14)\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 10 9\/16 inch (vs OEM 10 1\/4 inch)\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.550 inch (vs OEM 0.475 inch)\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e 1\/4 inch slip-on rack spacer\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eOuter Tie Rod Requirement:\u003c\/strong\u003e S14 OEM or aftermarket outer tie rod ends (required for S13 installs - factory S13 outer ends will NOT fit)\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Drift builds, angle kits, anywhere extra steering rotation is needed\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eSold:\u003c\/strong\u003e Pair (driver and passenger) with hardware\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 4px;\"\u003e\u003cstrong\u003eLegality:\u003c\/strong\u003e Off-road and competition use only\u003c\/p\u003e","brand":"ISR Performance","offers":[{"title":"Default Title","offer_id":45957124292805,"sku":"IS-ITR-240","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/2718\/9701\/files\/P1200464__84896.1630073060.500.659.jpg?v=1773346641","url":"https:\/\/www.isrcompetition.com\/products\/isr-performance-inner-tie-rods-nissan-240sx","provider":"ISR Competition","version":"1.0","type":"link"}