ISR Performance Front Sway Bar End Links - Hyundai Genesis Coupe 10+

The ISR Performance Front Sway Bar End Links are adjustable front end links for the 2010 and newer Hyundai Genesis Coupe (both 2.0T and 3.8 V6). Length-adjustable from 13 to 14 inches with a built-in hex nut for installation. Correct the sway bar geometry on a lowered Genesis Coupe and eliminate sway bar rebound.

What It Does

When you lower a Genesis Coupe, the factory sway bar end links are no longer the right length for the new ride height. That mismatch can preload the sway bar at rest, which works against the suspension instead of with it, and produces sway bar rebound (the bar pushing the wheel back down at full droop). Adjustable end links let you set length to match your ride height, neutralizing the sway bar at rest and restoring proper sway bar behavior in cornering.

Built-in hex nuts on the ball joints make installation and adjustment significantly easier than fixed-length end links, since you can hold the joint while torquing the lock nuts.

Specifications

• Adjustable length: 13 to 14 inches
• Threaded stud: 12 x 1.25mm
• Built-in hex nut on ball joint for tightening / loosening
• All hardware included for installation

Fitment

• 2010+ Hyundai Genesis Coupe 2.0T (BK1 and BK2)
• 2010+ Hyundai Genesis Coupe 3.8 V6 (BK1 and BK2)

Both engine variants share the same front sway bar geometry on the Genesis Coupe platform.

What's in the Box

• 2x Adjustable front sway bar end links (driver and passenger)
• 4x 12 x 1.25mm locking nuts
• All hardware required for installation

Product Details

Brand: ISR Performance

Part Number: IS-SBL-GN

Type: Adjustable Front Sway Bar End Links (Pair)

Vehicle Fitment: 2010+ Hyundai Genesis Coupe (2.0T and 3.8 V6)

Length Range: 13 to 14 inches (adjustable)

Thread: 12 x 1.25mm

Hex Nut Feature: Built into ball joint for easier install

Application: Correct sway bar geometry on lowered Genesis Coupe

Sold: Pair (driver and passenger), with all hardware

Legality: Off-road and competition use only