ISR Performance Front Upper Camber Arms Nissan 350Z / Infiniti G35
ISR Performance Front Upper Camber Arms Nissan 350Z / Infiniti G35
The ISR Performance Front Upper Camber Arms for the 350Z and G35 are adjustable upper arms with a serviceable ball joint, designed for maximum camber adjustment range without the typical pain of... See more
The ISR Performance Front Upper Camber Arms for the 350Z and G35 are adjustable upper arms with a serviceable ball joint, designed for maximum camber adjustment range without the typical pain of disassembly. Adjust with a single 19mm wrench, no need to remove the ball joint or any other components.
What It Does
Lowered 350Z and G35 chassis run aggressive negative camber gain in the front, and the factory upper arms don't give you the adjustment range to correct it. These arms extend the front camber adjustment significantly, with a typical range of +0.5 to -5.5 degrees. The 19mm wrench adjustment without disassembly is the big quality-of-life feature here. competitor arms typically require ball joint removal for every adjustment.
Fitment
Designed for the Nissan 350Z (Z33) and Infiniti G35 with the standard upper arm geometry. Will NOT fit the 2007 Infiniti G35 Sedan.
Installation and Chassis Clearance Notes
The 350Z and G35 chassis are designed so the factory upper arm can only extend a certain length at a given ride height before hitting the chassis. Our arms generally allow more adjustment range than the factory chassis recess accommodates, so depending on your desired alignment specs, you may need to modify the factory control arm recess for clearance. If you don't modify the recess, that recess becomes the limit on adjustment, capping the camber correction you can achieve.
You must reuse your factory ball joint seat when installing these arms.
On excessively lowered vehicles, check arm-to-chassis clearance through the full range of suspension movement. Chassis contact can damage the arm and adjusters.
What's in the Box
- 2x front upper camber arms (with serviceable ball joint)
Product Details
Brand: ISR Performance
Part Number: IS-FUCA-Z33
Type: Front upper camber arms (adjustable)
Vehicle Fitment: Nissan 350Z (Z33), Infiniti G35 (excluding 2007 G35 Sedan)
Typical Adjustment Range: +0.5 to -5.5 degrees camber
Adjustment: 19mm wrench (no disassembly required)
Ball Joint: Included, serviceable
Required (reuse): Factory ball joint seat
Possible Modification: Factory control arm recess clearancing for maximum adjustment range
Sold: Pair
Legality: Off-road and competition use only