ISR Performance Front Upper Camber Arms Nissan 370Z / Infiniti G37

Our front upper camber arms for the 370Z and G37, sold as a pair. Designed for the maximum range of camber adjustment the Z34 chassis can physically accommodate, with a 19mm wrench adjustment that doesn't require pulling the ball joint to dial in alignment changes.

What It Does

Replaces the factory front upper control arms with an adjustable design so you can correct the negative camber gain that comes with lowering a Z34 chassis, or set a proper aggressive camber spec for track and time attack use. Unlike arms that force you to disconnect the ball joint every time you want to tweak the alignment, ours adjust with just a 19mm wrench in place on the car. The included ball joint is high quality and serviceable, so when it eventually wears out you replace the joint rather than the whole arm.

Fitment

Fits the Nissan 370Z (Z34) and Infiniti G37. Sold as a pair for the front axle.

Important Notes on Adjustment Range

The factory 370Z and G37 chassis has a control arm recess that physically limits how far the upper arm can extend at a given ride height before contacting the chassis metal. Our arms allow a wider range of adjustment than the factory recess can accommodate at most ride heights. If you're running an aggressive drop and want full camber correction, you may need to modify the factory control arm recess for additional clearance. If you don't want to modify the chassis, the recess will cap how far the arm can extend, limiting camber correction. On excessively lowered cars, check clearance between the arm and the chassis through full suspension travel; contact can damage the arm or the adjusters.

What's in the Box

• 2x Front upper camber arms
• Serviceable ball joints (installed)

Product Details

Brand: ISR Performance

Part Number: IS-FUCA-Z34

Type: Front Upper Camber Arms (pair)

Vehicle Fitment: Nissan 370Z (Z34), Infiniti G37

Adjustment Range: Typical +0.5 to -5.5 degrees (chassis clearance may limit upper end)

Adjustment Method: 19mm wrench in place (no ball joint removal required)

Ball Joints: Serviceable

Sold: As a pair

Legality: Off-road and competition use only