ISR Performance Series II - EP Dual Resonated Catback - BMW E46 Early 323/328

The ISR Performance Series II EP Dual Resonated Catback is the complete modular exhaust system for the BMW E46 Early 323/328. Stainless steel construction, dual 2.5 inch mid pipes flowing into a resonator and 3 inch transition, finishing with a dual 3.0 inch straight pipe rear and extended tips designed to clear deeper aero bumpers.

What It Does

The factory E46 exhaust is restrictive and tuned for quiet operation. The ISR Series II EP Dual replaces it with a free-flowing path that improves exhaust scavenging, drops weight, and unlocks the aggressive inline-six tone the E46 platform is supposed to have. The dual 3.0 inch straight pipe rear gives this configuration the loudest, most race-inspired tone in the Series II E46 lineup.

Series II construction also routes the pipes for increased ground clearance compared to traditional catback layouts, which matters on lowered E46s scraping over driveways and speed bumps. The extended tips are designed to fit deeper aftermarket aero bumpers and still provide an aggressive look on stock bumpers.

Critical Fitment

Early 323/328 ONLY. This catback is designed around the 323/328 header flange orientation and placement. It will NOT fit late 325/330 vehicles. If you have a 325 or 330, order the Late 325/330 catback instead.

Header Requirement

Must use the OEM 323/328 header OR an aftermarket header with the same flange orientation and placement.

Other Compatibility Notes

• NOT tested on automatic transmission vehicles - development was done on manual cars
• NOT tested on non-USDM chassis

Modular Architecture

This catback uses ISR's Series II modular construction. Once installed, you can swap the rear section to MBSE for a different tip configuration and tone (sold separately) without buying a new exhaust.

Fitment

• BMW E46 323/328 (Early) USDM, manual transmission recommended

What's in the Box

• 2x Flex mid pipes
• 1x EP Dual rear section
• 1x Resonated mid section
• 1x Gasket and hardware pack

Product Details

Brand: ISR Performance

Part Number: IS-S2EPDR-E46-E

Type: Series II EP Dual Resonated Modular Catback Exhaust

Vehicle Fitment: BMW E46 Early 323/328 (USDM)

Header Requirement: OEM 323/328 header or aftermarket with same flange orientation - NOT compatible with 325/330

Material: High-quality stainless steel

Mid Pipe Diameter: Dual 2.5 inch

Center Section: 3 inch

Rear Configuration: Dual 3.0 inch straight pipe with extended tips

Tone Profile: Resonated mid section, straight-pipe rear - aggressive with reduced highway drone

Architecture: Series II modular (rear section interchanges with MBSE)

Transmission Note: Not tested on automatic transmissions

Chassis Note: Not tested on non-USDM chassis

Sold: Complete catback (mid + rear)

Legality: Off-road and competition use only