ISR Performance Series II - Resonated Mid Section Only - BMW E46 Late 325/330

The ISR Performance Series II Resonated Mid Section is the standalone mid component of the Series II modular exhaust platform for the BMW E46 Late 325/330. Sold separately so owners can change tone character (resonated vs non-resonated) or replace a damaged mid section without buying a whole new catback.

What It Does

This is the RESONATED MID SECTION ONLY, not a complete exhaust system. It's the front half of the Series II platform, with flex downpipes that connect to the factory or aftermarket 325/330 headers, and the resonator and mid pipe transition that mates to a Series II rear section (EP Dual or MBSE). The resonated configuration tones down highway drone while still delivering an aggressive throttle response under load.

Critical Compatibility

ONLY works with ISR Series II exhaust systems. This mid section will NOT bolt up to the factory OEM E46 exhaust or to original (pre-Series II) ISR exhausts.

Header style matters. This mid section is designed for late 325/330 style headers ONLY. It will NOT fit early 323/328 style headers. If you have a 323 or 328, order the Early 323/328 mid section instead.

Transmission Note

NOT tested on OEM automatic vehicles. The Series II exhaust development was done on manual transmission cars.

Fitment

• BMW E46 Late 325/330 (OEM 325/330 header or aftermarket with same flange orientation and placement)

This Is Not a Complete Exhaust

You need a Series II rear section (EP Dual or MBSE) to complete the system.

What's in the Box

• 1x Resonated mid section
• 2x Flex downpipes
• 1x Exhaust hanger bracket
• 1x Gasket and hardware pack

Product Details

Brand: ISR Performance

Part Number: IS-S2RMD-E46-L

Type: Series II Resonated Mid Section (mid only)

Vehicle Fitment: BMW E46 Late 325/330 ONLY

Header Compatibility: Late 325/330 style headers only - NOT compatible with 323/328 headers

Configuration: Resonated (refined tone, reduced highway drone)

Transmission Note: Not tested on automatic transmissions

Compatibility: ISR Series II exhaust systems ONLY - not OEM or original ISR exhausts

Required to Complete System: Series II EP Dual or MBSE rear section (sold separately)

Sold: Mid section only

Legality: Off-road and competition use only